Tsurumi’s small dewatering pump, the LB sequence, is designed for functions where area is tight, particularly development. Secured by rope or chain, an LB can be utilized in purposes which contain slender pipes, small tanks, deep pits and in remote areas that are tough to reach with bigger tools. The LB mannequin has a fully symmetrical design with no protruding elements, permitting it to be lowered to unknown depths without any danger of snagging. With เครื่องมือที่ใช้วัดความดัน of solely 187 mm, the pump’s round cross-section even fits into smaller filter pipes. There is also a version with a water stage sensor which is only a few millimetres longer. The pump then controls itself mechanically, switching on or off depending on the water stage. The LB presses water with dirt particles up to 6 mm in size via the housing, allowing optimum cooling of the motor. The models within the series pump 225–440 l/minute and to a most of 17.5 m. The smallest model weighs around 10 kg dry, the biggest round 30 kg.
fittingthai.com & radiusglobal.co.th Shop power by Odoo ERP