The versatility of Pneumatic high stress grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the loose rock mass. The maximum grain measurement cannot exceed zero.2 mm.
Grouting pump operation and maintenance is straightforward, secure and reliable. This pump is utilized in mines working beneath tough situations because it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic stress in the air cylinder exerts a high strain on the grout combination which leads to ejection of grout with a excessive pressure and velocity. The valves of the air cylinder in the pump function routinely to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to finish the pumping cycle.
Pneumatic grout pump can be pushed even with out Electrical power provide in remote areas through the use of engine pushed compressor.
pressure gauge ไท วัสดุ is majorly used in construction and mining industry for injecting materials into broad and medium measurement hole in beams, columns ,basement walls and flooring, lift shaft concrete wall fill-up and so on. In mining industry it’s used to replenish cement solution where there is a gap exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is widely used in tunnels, coal mine, bridges and dams, building foundation, and other underground tasks, and inflammable, explosive websites and different dangerous environment.
It has application in chemical business also to pump out chemical slurries.
The pump is electricity free so, can be utilized at any site situation whether or not it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate amount of the grouting volume is eight or10 times of the amount at first. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and circulate may be adjusted in accordance with the requirements of grouting,(The circulate of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, building, mining and so on. ground/underground development.
Benefits
Mining Pneumatic Grouting pump has some nice advantages of low energy consumption, small vibration, low noise, small size, high efficiency, dependable efficiency, stress and flow control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried simply. It is designed for simple operation and low upkeep. Last but not least its spare parts are easily obtainable.
Share