The versatility of Pneumatic high pressure grouting pumps

Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the loose rock mass. The most grain measurement cannot exceed zero.2 mm.
Grouting pump operation and upkeep is straightforward, protected and dependable. This pump is used in mines working under difficult circumstances as a outcome of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge , pumping cylinder, outlet with quick release coupling and wheels.
How it works

Pneumatic stress in the air cylinder exerts a excessive pressure on the grout combination which results in ejection of grout with a excessive stress and velocity. The valves of the air cylinder in the pump function routinely to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be pushed even without Electrical energy provide in remote areas by utilizing engine pushed compressor.
Applications

The pump is majorly used in building and mining business for injecting material into extensive and medium dimension gap in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so forth. In mining industry it’s used to replenish cement answer where there’s a gap exists between structure and rock and for soil stabilization.
digital pressure gauge tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work

This pump is extensively utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground projects, and inflammable, explosive websites and other bad surroundings.
It has software in chemical industry additionally to pump out chemical slurries.
The pump is electrical energy free so, can be utilized at any site condition whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the ultimate quantity of the grouting quantity is 8 or10 instances of the quantity in the beginning. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and move could be adjusted in accordance with the requirements of grouting,(The circulate of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, development, mining and so on. ground/underground construction.
Benefits

Mining Pneumatic Grouting pump has some great benefits of low power consumption, small vibration, low noise, small dimension, excessive efficiency, reliable efficiency, strain and flow control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it can be carried easily. It is designed for simple operation and low upkeep. Last however not least its spare parts are easily obtainable.
Share